Aeroshell

AEROSHELL AVIATION OIL 15W-50 MULTIGRADE

Aeroshell Grease 14 - Purchased by Tube

Aeroshell Grease 33 - Purchased by Tube

Aeroshell Grease 5 - Purchased by Tube

Aeroshell Grease 64 - Purchased by Tube

Aeroshell Grease 7 - Purchased by Tube

Overview AeroShell Oil Diesel Ultra is a fully synthetic, multigrade engine oil designed for use in the new generation of compression ignition (Diesel) Aviation Piston Engines. The formulation has been selected to be suitable in piston engines fuelled by Jet A or Jet A-1 and is designed for use in the latest highly rated turbocharged diesel engines under all operation conditions. AeroShell Oil Diesel Ultra MUST NOT be used in spark ignition, or Avgas powered aircraft engines.

Aeroshell W100 is an ashless, SAE 50 dispersant oil that provides excellent service in all four cycle aircraft piston engines. We understand your desire for low-cost, dependable flight. You can rely on AeroShell products to help protect your engine, reduce its maintenance costs and improve its efficiency. Whether you fly for pleasure or your business depends on flight, AeroShell products are designed to help lift your performance. Single Grade Ashless Dispersant Oils AeroShell Oils W80, W100 and W120 are ashless dispersant oils specifically developed for aviation piston engines. They combine non-metallic additives with selected high viscosity index base oils to give exceptional stability, dispersancy and anti-foaming performance. No general rule exists for every engine type when choosing the correct grade of oil; however, based on the average ambient outside temperature at engine start-up the most common grades are SAE 40, SAE 50 and SAE 60, which equates to AeroShell Oil W80, W100 and W120 respectively. Traditionally, the choice is associated with climatic zones - AeroShell W80 for cold climate regions (-17 - 21°C), AeroShell Oil W100 for temperate regions (15 - 30°C) and AeroShell Oil W120 for warmer climates (above 26°C). AeroShell Oils W80, W100 and W120 are produced to meet fully the SAE specification J-1899 (Grades SAE 30, 40, 50 and 60 respectively). Furthermore, they all have military qualification approval and are listed on the Qualified Products List (QPL) issued by the US Navy and on the Technically Acceptable Products List (TAPL) issued by the UK Ministry of Defence. The blending plants employed to manufacture these oils also hold the approval of the specification authorities and this ensures that the high quality standard is always maintained.