A11417-04 Aerospace Welding Tail Pipe PA-22-135/180/160/108

PIPER PART NUMBERS 11417-02 AND 11417-04 ARE REPLACED BY FAA APPROVED NEW PMA PART NUMBER A11417-004

FITS PIPER MODELS:

PA 22 S/N ALL

This Tailpipe is engineered and manufactured a high tech manufacturing facility, and welded and fabricated by an expert team, using aerospace grade 321 stainless steel, which provides reliable service and resist corrosion in high temperature exhaust system conditions.

AIRCRAFT MAKE / MODEL: PIPER 

PARTS CATEGORY: TAILPIPE

MATERIALS: 321 STAINLESS STEEL

PART CONDITION: AWI FAA APPROVED NEW PMA 

AWI new, overhauled and repaired parts meet the FAA airworthiness requirements.

AIRWORTHINESS DIRECTIVE (AD) AD 68-05-01 FOR EXHAUST SYSTEMS WITH LESS THAN 950 HR. TIME IN SERVICE, 100 HOUR REPETITIVE INSPECTION OF ENTIRE EXHAUST SYSTEM AND INTERNAL INSPECTION OF MUFFLER.

FOR SYSTEMS WITH 950 HR OR MORE TIME IN SERVICE, THE INSPECTION REQUIREMENT IS EVERY 50 HRS.  PER THE FAA, AWI OVERHAULED PARTS QUALIFY AS ZERO TIME PARTS

MUFFLER HAVE INTERNAL BAFFLES AND MUST BE INTACT FOR AIRWORTHINESS

CHECK EXHAUST STACKS FOR CRACKING AND HEAT DISTORTION

Lyc. 0-235 PA 12, PA14, PA 16 PA 20-115, PA 22-108

Lyc. 0-290 PA20-135, PA22-150, 

Lyc. 0-320 PA 22-150 & PA22-160 & PA22 W/OUT REAR SEAT HEAT AND PA22 WITH OR WITHOUT REAR SEAT HEATER